| 
|
So you
own an old airhead, huh? Cool bike! If your looking for some wind
protection in the shape of a quarter fairing, you've come to the
right place! We also make a beautiful cafe seat (this is the original
seat, sculpted by our head designer Kent Riches, that some weasel
knocked off and is now selling from his garage in Bumfuck,CO),
full sized and bobbed front and rear fenders, dash panels to hold
your clocks, a 10 gallon fuel tank, a cafe style half fairing
and even a competition upper if you're crazy enough to race one
of these bad boys... |
 |
Airhead owners get all the chicks...
|
 |
R90S
BMW R90S cafe quarter fairing - 8"
BMW R90 quarter fairing, but will fit other models as
well. 8.5" opening for the oversized BMW R-series headlight
(tapers from 8.5" at the face to 8.25"). This is a sleek
version without turn signal mounts.
We recommend installation with the dash panel (R90S2,
see below). Stock windscreens will be a little long in the back
when installed without a dash and may require trimming.
Price |
 |
R90S7
BMW R90 cafe quarter fairing - 7"
BMW R90 quarter fairing, modified to accept a standard
7" bulb.
We recommend installation with the dash panel (R90S2,
see below). Stock windscreens will be a little long in the back
when installed without a dash and may require trimming.
Price |
 |
R90S2
BMW Dash panel for R90S and R90S7 quarter fairing
This dash panel is sandwiched between the fairing and
the windshield. The windscreen screws will pass through the windscreen,
a rubber washer, trhe dash and the fairing. This is why stock
windscreens will be a little long in the back when installed without
a dash and may require trimming.
Price |
 |
R90SC
BMW Competition quarter fairing
Are you racing your airhead? You need one of these!
Price |
 |
R90ST
BMW R90S Quarter fairing with turn signal mounts
BMW R90 replacement quarter fairing, but will fit other
models as well. 8.5" opening for the oversized BMW headlight
(tapers from 8.5" at the face to 8.25"). This is the
version with turn signal mounts.
We recommend installation with the dash panel (R90ST2,
see below). Stock windscreens will be long in the back when installed
on a fairing without the dash and may require trimming.
Price |
 |
R90ST2
BMW Dash panel for R90ST quarter fairing
This dash panel is sandwiched between the fairing and
the windshield. The windscreen screws will pass through the windscreen,
a rubber washer, trhe dash and the fairing. This is why stock
windscreens will be a little long in the back when installed without
a dash and may require trimming.
Price |
 |
R90SWS
BMW R90S Windscreen - smoke
Stock size, dilled. Fits stock R90S fairing and all variations
above. Windscreens may be a little long in the back when installed
without a dash and may require trimming.
Price |
| 
|
CCF
Classic cafe 1/2 fairing
This sculpted cafe half fairing has fairly tall windscreen
height to use either clubman or low BMW style handlebars.
Price
|
 |
BBMW1
50's BMW Rennsport style fly screen
Price
|
 |
BMWRSS1
BMW Cafe seat with rondel
Classic Rennsport style seat with a recessed spot on
the tail for a BMW rondel. The seat comes with an aluminum bracket,
that you will have to mount inside the back of the tail with some
5-minute epoxy (available from any hardware store) so it attaches
to the accessory mount in the back. We used to glass these mounts
into the back of the tail but have noticed the mount on the bike
can be off by as much as 1/4", so it's better if you do it
yourself, so you can mount the seat perfectly straight.
We also offer two different styles of seat pans,
for use with both short and long tanks, see below.
Larger
photo
Price |
 |
BMWRSS2
BMW Cafe seat without rondel
Classic Rennsport style seat with a smooth rear hump.
The seat comes with an aluminum bracket, that you will have to
mount inside the back of the tail with some 5-minute epoxy (available
from any hardware store) so it attaches to the accessory mount
in the back. We used to glass these mounts into the back of the
tail but have noticed the mount on the bike can be off by as much
as 1/4", so it's better if you do it yourself, so you can
mount the seat perfectly straight.
We also offer two different styles of seat pans,
for use with both short and long tanks, see below.
Larger
photo
Price
|
 |
BMWRSSUPS
BMW Cafe rennsport seatpan - short
This upholstery pan fits our Rennsport cafe seats. It
kicks up in the front area to hide the unsightly gap in the back
of the tank where the tank mounting bolts live. This is the short
seatpan, to work with the longer R90S style fuel tanks.
Length: 16.25"
Price |
 |
BMWRSSUPL
BMW Cafe rennsport seatpan - long
This upholstery pan fits our Rennsport cafe seats. It
kicks up in the front area to hide the unsightly gap in the back
of the tank where the tank mounting bolts live. This is the long
seatpan, to work with the short style fuel tanks Tanks that are
definitely short, to our knowledge:
- toaster tanks
- tanks with rubber knee pads
Length: 18"
Price |
 |
BMWBF
BMW Front fender
This is a huge fender. we're not sure if this is a police
bike style or not, we don't remember what kind of boxer it came
off. All we know it's BIG. It looks like it would cover about
50% of the wheel!
Larger
photo
Price |
 |
BMWR1
BMW Front fender
R-series front fender
Larger
photo
Price |
 |
BMWR1M
BMW Bobbed front fender
R-series front fender - bobbed
Larger
photo
Price |
 |
BMWR2
BMW Rear fender
R-series rear fender
Larger
photo
Price |
|
BMWBT
BMW Fuel tank -10 gallon
Large Heinrich style touring tank for all you Iron
Butts.
** Currently not available. Expected late 2008.
Pricing to be determined. **
Price
|
