BUELL S2 THUNDERBOLT, M2, XB9R, XB12R, LIGHTNING, THUNDERBOLT, RACE, FAIRING, FAIRINGS, BODYWORK

All Prices are listed at the bottom of the page

BS21
Buell S3 Thunderbolt Upper fairing
Direct replacement part for the Buell S3 upper fairing. Replace your crash damaged pieces or install our lightweight fiberglass piece on your S2. Simply drill the mounting holes, mount onto your chassis, and take off and do your custom paint work. If you are trying to replace some crash damaged bodywork or want to lighten up your Buell a little bit this is the piece that you need. Give us a call today!

BS22
Buell S3 Thunderbolt Tail section
This is a replacement piece for the Buell S3 tail section. It comes with a license plate bracket molded into it. The taillight is cut open for street use and you will need to drill some mounting holes to make this fit.

BS23
Buell S3 Thunderbolt Gas tank shell
Replace your heavy or crashed stock Buell gas tank shell with our lightweight fiberglass unit.

BS24
Buell S3 Thunderbolt Front fender
Replace your heavy or crash damaged front fender for your Buell with our lightweight fiberglass piece.

BS25
Buell S3 Thunderbolt Rear fender
We made a crap load of these fenders for the Buell recall when Buell needed a rear fender for there S3s and they called us. This fender is also available in carbon fiber. If you need to replace your Buell S3 fender we’ve got what you need. Give us a call today!

BS16
Buell S3 Thunderbolt Belt guard
This is the lower rear belt guard for the steel swing arm Buells.

BS110
Buell S3 Thunderbolt Sprocket cover
This is a really cool fiberglass piece that replaces the plastic sprocket cover on the Buell motor. You see, the plastic cover warps really easy and looks really ugly. This fiberglass piece is a lot sturdier and a lot of people purchase the carbon fiber version that we make. Give our sales reps a call today!

BS2TLRDOM
Buell S2T Thunderbolt Lower fairing
this is a replacement lower fairing for the S2T touring motorcycle. This is the domestic version that was used on the bikes sold here in the U.S.

BS2TLRHDI
Buell S2T Thunderbolt Lower
This is the lower used on the exported Buell S2T touring motorcycles. This piece was not used on domestic motorcycles but was used on all touring motorcycles exported out of the country. This is almost identical to the DOM but has only a slight different bolt pattern.

HDAFC1
Buell S3 Thunderbolt Air filter cover
This is an oval air filter cover that is used on some Buells and pretty much all sportsters. This lightweight fiberglass piece takes some weight off of the outside of the corroborator to keep it from moving around. This is a real popular piece made in carbon fiber as well as fiberglass. If you need a really cool trick carbon fiber piece give us a call we can make if for you today.

BM26
Buell S3 Thunderbolt Sprocket cover
This is an Air-Tech design sprocket cover for the sportster motor Buells. This cover actually covers the contours of the can cover on the sportster motor and looks way cool. It looks a lot better than the stock Buell plastic crap. This piece is available in fiberglass and carbon fiber. Call our sales reps today!

BS1AB
Buell S3 Thunderbolt Air box
This is a custom Air-Tech design air box for the chassis Buells. This sleek design screws directly onto the carburetor assembly, has a usable uni-filter, and an air filter cover that screws onto the back of the plate. This is a complete kit and just requires some drilling and mounting, we also recommend rejetting the carb since this air box flows considerably more air than the stock breadbox does. Increase your performance and increase your look. Get one of these air boxes today!

GP Kit

If you're looking for a super aerodynamic fairing for your S3, Airtech has what you need! We have designed beautiful bodywork fit for a Grand Prix race bike!

Not only does this bodywork look fast but also we are confident that this GP bodywork will produce impressive landspeed records at the Bonneville.

BS1GP1
Buell S3 GP fairing kit
This sleek aerodynamic two-piece front fairing assembly features a front air intake duct that pressurizes the air box assembly. The radiuses around the front leading edge of the fairing are aerodynamic and the lower belly pan will catch all of the Harley fluids. Also included is the teardrop 'aero' seat. This seat is guaranteed to close the envelope behind the rider. It has a complete filled in anti-draft shield underneath the seat and utilizes the stock S1 seat pan, S1 turning signals and S1 tailllight for those who wish to run on the street.

This tail section will not work with a Corbin seat.

This kit was originally designed for the S1, but will fit the S3 with some modifications:
- You will have to cut (shorten) the subframe to fit the tail section.
- Our main fairing stay will have to be modified to fit the mounting lugs on the steering head.
- You need an S1 seat and S1/M2 taillight.

Does not fit S2.

This kit includes:
- upper fairing
- lower fairing
- windscreen
- mounting brackets
- tail section
- undertail

BS1GP2
Buell S3 - GP tail section only
The GP tail section is sold seperately. It utilizes the stock S1 upholstery.

This tail section will not work with a Corbin seat.

This kit was originally designed for the S1, but will fit the S3 with some modifications:
- You will have to cut (shorten) the subframe to fit the tail section.
- You need an S1 seat and S1/M2 taillight.

Does not fit S2.

BS1GP3
Buell S3 Air box
This is an air box assembly that works with our Buell GP fairing kit. The backing plate bolts onto the caburator assembly, and the fairing assembly holds the air filter in place. A three-inch round duct hose extends forward to the air duct in the front of the fairing assembly. Get nice, cool, pressurized air into the caburator assembly. A must if you are racing a tube chassis Buell with a Grand Prix fairing assembly.

Superbike Kit

How would you like to make your S3 look long, thin and fast? No Problem, Airtech has made your dreams come true. Grafted from the factory Harley VR1000 Superbike bodywork, this sleek bodywork will turn your Buell S3 in your dream machine. One of the unique features to this one piece fairing assembly includes air ducts that pressurize the air box assembly to increase the top end speed. This one-piece frame mounted fairing comes with brackets and windscreen. So if you are tired of your S3 looking like your friends, give Airtech a call, we can help you out.

This kit includes:
- upper fairing
- windscreen
- mounting brackets
- tail section
- undertail

BS1SB1
Buell S2 Super bike fairing kit
If you want to dress up your naked Buell this fairing assembly is what you want. This fairing is not as full coverage as our Grand Prix fairing unit, this assembly exposes a little bit of the motor out of the bottom. The fairing design was originated from the factory Harley Davidson VR1000 road race bikes. Although you may not be able to afford a VR1000 you can sure make your Buell look like one. Give our sales reps a call today!

This tail section will not work with a Corbin seat.

This kit was originally designed for the S1, but will fit the S3 with some modifications:
- You will have to cut (shorten) the subframe to fit the tail section.
- Our main fairing stay will have to be modified to fit the mounting lugs on the steering head.
- You need an S1 seat and S1/M2 taillight.

Does not fit S2.

BS1SB2
Buell S3 Super bike race tail
This is the race tail assembly out of our super bike fairing kit. This seat bolts onto the tube chassis Buells and uses the stock S1 upholstery. This piece also comes with and under seat enclosure.

This tail section will not work with a Corbin seat.

This kit was originally designed for the S1, but will fit the S3 with some modifications:
- You will have to cut (shorten) the subframe to fit the tail section.
- You need an S1 seat and S1/M2 taillight.

Does not fit S2.

Streetfighter - Manta

The S3 just begs for a fighter conversion, it's already got the stance and the attitude. You bring the bodywork!

ROGUEF1
Buell S3 'Rogue' fairing
This is an extremely cool street fighter style of fairing assembly for your Buell motorcycles. Simply take off that huge headlight and little bikini fairing and mount on our cool, new design that has duel projector beam lights. This is a bitchin' little fairing to mount on your street fighter. Get yours today!

Kit contains:
- fairing
- 2 headlights
- headlight bucket
- windscreen
- mounting hardware

MANTA4
Buell S3 'Manta' tail section
Just go ahead and admire how much smaller and sleeker this tail section is than the bulky looking stock seat. We also did a matching slick undertail with a license plate mount.

That's right, this is by far the most sexy tail available for the S3.

And no, you won't be sitting on skimpy racing foam, we actually went through the trouble of designing a beautiful molded seat pad. What are you waiting for? Get one today!

This kit was originally designed for the S1 and M2, but will fit the S3 with some modifications:
- You will have to cut (shorten) the subframe to fit the tail section.
- You need an S1/M2 taillight.

Please note these very important items!

We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #	Description	Retail
BUELL S3 THUNDERBOLT '97-'02
BS21	BUELL S2 THUNDERBOLT UPPER FAIRING - STREET	$207.48
BS22	BUELL S2 THUNDERBOLT TAIL SECTION - SUPERSPORT	$159.08
BS23	BUELL S2 THUNDERBOLT TANK SHELL	$242.07
BS24	BUELL S2 THUNDERBOLT FENDER - FRONT	$72.45
BS25	BUELL S2 THUNDERBOLT FENDER - REAR SWING ARM	$82.99
BS16	BUELL S2 THUNDERBOLT LOWER REAR BELT GUARD	$68.45
BS110	BUELL S2 THUNDERBOLT SPROCKET COVER	$62.25
BS2TLRDOM	BUELL S2 THUNDERBOLT RIGHT SIDE LOWER (DOMESTIC)	$80.00
BS2TLRHDI	BUELL S2 THUNDERBOLT RIGHT SIDE LOWER (HDI)	$80.00
HDAFC1	BUELL S2 THUNDERBOLT OVAL AIR FILTER COVER	$72.45
BM26	BUELL S2 THUNDERBOLT SPROCKET COVER	$62.25
BS1AB	BUELL S2 THUNDERBOLT AIR BOX- CUSTOM AIR TECH DESIGN	$156.45
SUPERBIKE
BS1SB1	BUELL S2 SUPERBIKE CONVERSION KIT	$729.75
BS1SB2	BUELL S2 SUPERBIKE CONVERSION - TAIL SECTION ONLY	$246.75
BS1SB3	BUELL S2 AIR BOX KIT - SUPERBIKE CONVERSION	$156.45
GP
BS1GP1	BUELL S2 GP CONVERSION KIT	$939.75
BS1GP2	BUELL S2 GP CONVERSION - TAIL SECTION ONLY	$246.75
BS1GP3	BUELL S2 AIR BOX KIT - GP CONVERSION	$156.45
STREETFIGHTER
ROGUEF1	BUELL S2 "ROGUE" BICLOPS FAIRING KIT	$318.14
MANTA4	BUELL S2 "MANTA" TAIL SECTION	$329.00

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices